The job of flow micro regulators is to regulate speed in the pneumatic cylinders. The configuration of both type C (to be mounted on the cylinder inlet) and type V (to be mounted on the valve port) is such as to ensure full flow on feed and regulated flow on discharge. Type B (bidirectional) can be used to regulate the flow both on feed and discharge.
Flow microregulators are divided into 4 series:
• MRF COMPACT O: can be adjusted using a screwdriver; the regulation pin is lubrified with a particular antivivration grease; it has reduced dimensions and fine adjustment in the first turns; adjustment can be prevented by assembling a disposable cap (supplied separately) that can be removed using a tool.
• MRF COMPACT N: can be adjusted using the knob and/or screwdriver; adjustment can be prevented by tightening the ring nut;it has the same regulation curve as those in series O.
• MRF HIGH-FLOW: can be adjusted using the knob and/or screwdriver; adjustment can be prevented by tightening the ring nut; it is ideal for use in installations requiring high flow rates both on regulation and discharge.
Available in G1/8 and G1/4 and with a technopolymer ring.
• MRF PUSH-LOCK: it is the only one in the MRF series with a PUSH-LOCK knob, that can be replaced by an anti-tampering knob (supplied separately). Available in G1/8 and G1/4 and with a technopolymer ring. INTRODUCTION FLOW MICRO-REGULATORINTRODUCTION FLOW MICRO-REGULATORSpecial focus has been placed on miniaturization of the components (mainly for COMPACT MRF series O), which saves considerable space. All the MRF with a pipe engage-release system of the latest generation that facilitates detachment of the pipe even under difficult operating conditions. The rings can be rotated even with the MRF installed, which means that they can be mounted with the pipe facing towards any direction.